Stainless steel centrifugal pump layout and their corresponding occasions

If the structure and performance of stainless steel centrifugal pump and other pump products are different, their layout requirements and methods are much the same, but as the basis of stainless steel centrifugal pump can be normal and stable, the layout of knowledge also want to master.

First of all, the stainless steel centrifugal pump layout, it can be arranged in the open air, can also be arranged in the open air, or even directly arranged in the room. Open layout is generally under or on the side of the pipe gallery, and can also be placed near the suction equipment, mainly because of good ventilation in these locations, easy operation and maintenance.

The reason why the semi-open layout of stainless steel centrifugal pump, mainly for rainy areas, can be arranged below the pipe gallery pump, in the upper part of the pipe ceiling; Or the pump is arranged on the lower ground of the frame, with the frame platform as the ceiling.

In some cold and windy areas, where there are special requirements for the process, indoor layout for stainless steel centrifugal pump is a good choice, can have enough protection for the equipment, reduce the adverse impact of external environmental factors on it.

For open air or semi-open layout of stainless steel centrifugal pump pump, pump and prime mover axis vertical axis and pipe gallery; And for the indoor layout of the pump, when the liquid temperature is higher than the spontaneous combustion point or liquid transportation of hydrocarbon, and other pumps should be arranged in their respective rooms, separated by a firewall.

And the net distance between the pump end or the pump side and the wall, the net distance between the two rows of pumps can not exceed the specified standards, of course, how to arrange depends on the specific type and specifications, in short, both to ensure the normal operation of stainless steel centrifugal pump, but also easy to repair and maintenance in the future.