What are the common faults of grate stuck

1. If the chain and sprocket teeth are not meshed well or badly worn, they will also be stuck.

2, sprocket shaft bearing (copper sleeve) lack of oil dry grinding or damage will also be stuck.

3. The adjusting bolts on both sides of the grate are not adjusted properly, and the front and rear axes are not parallel, resulting in the unilateral operation of the grate, and will also be stuck.

4, grate with hard things (metal, welding head, nails, firebrick burn collapse), so that grate piece stuck.

5, sintering block is too large, track deformation, increase the running resistance of grate.

6, grate too loose, sprocket wear, resulting in grate head arch and stuck.

7. Because of long time operation, grate is damaged and stuck.

8, the grate pin has not been checked for a long time, and the two sides of the wall friction, or stuck side, also easy to be stuck.

When the grate is stuck, in the process of processing, the grate should first be inverted for a distance, and then turn off the power supply, analyze and judge the cause of the stuck, and treat the symptoms.